| File No |
Staus |
Type |
Decision |
Received Date |
Name |
Development Address |
Description |
| 1154 |
INCOMPLETED APPLICATION |
PERMISSION |
|
15/02/2011
Tuesday |
Peter Gillooly |
Derrane and Roxborough Townlands
Roscommon
|
to erect two number 2.3BW wind turbines of up to 85 metre hub height and up to 82 metre rotor diameter with a total height not exceeding 126 metres, associated site works to include new internal site tracks, turbine handstands, borrow-pits and cabling works, on his site at |
| 11126 |
APPLICATION FINALISED |
PERMISSION |
C |
30/03/2011
Wednesday |
Peter Gillooly, |
Derrane and Roxborough Townlands,
Roscommon,
Co Roscommon. |
to erect two number 2.3MW wind turbines, of up to 85 metre hub height and up to 82 metre rotor diameter with a total height not exceeding 126 metres, associated site works to include new internal site tracks, upgrading existing site tracks, turbine hardstands, control sub station, and cabling works, on site at |
| 18313 |
APPLICATION FINALISED |
PERMISSION |
C |
26/06/2018
Tuesday |
Peter Gillooly, |
Derrane and Roxborough
County Roscommon
|
The development will consist of:- Minor technical amendments to the development permitted under Roscommon County Council Planning Register Reference 11/126 to provide for the relocation and redesign of the permitted control substation; the construction and re-alignment of internal site access tracks; redesign of permitted hardstand areas; re-alignment of cabling works; minor upgrade works to permitted site entrance; and all associated site development and reinstatement works at |
| 18447 |
APPLICATION FINALISED |
PERMISSION |
R |
04/09/2018
Tuesday |
Peter Gillooly |
Derrane and Roxborough
Co. Roscommon
|
development consisting of: Minor amendments to the development permitted under Roscommon County Council Planning Register References 11/126 and 18/313 to provide for the relocation of the permitted wind turbines and associated infrastructure (site roads and crane hard- standings); amendments to the turbine dimensions to allow for a maximum overall tip height of up to 150 metres and all associated site development and reinstatement works. (The maximum total combined output of the wind turbines will not exceed 4.9 megawatts) at |
| 20145 |
APPLICATION FINALISED |
PERMISSION |
C |
14/04/2020
Tuesday |
Peter Gillooly |
Derrane and Roxborough
Co. Roscommon
|
for development consisting of minor amendments to the development permitted under Roscommon County Council Planning Register Reference 18/313 to provide for (i) the relocation of the permitted control substation approximately 810 metres to the north, (ii) omission of access track and underground electrical cabling associated with the permitted control substation, (iii) installation of approximately 530 metres of underground electrical cabling to connect the proposed control substation to permitted wind turbine T1 and (iv) all associated site development access and reinstatement works at |
| 22172 |
INCOMPLETED APPLICATION |
PERMISSION |
|
06/04/2022
Wednesday |
Peter Gillooly, |
Derrane & Roxborough
Co. Roscommon
|
Permission or amendments to extant planning permission ABP-307726-20 to provide for: 1. Erection of two Enercon E138 turbines models in lieu of the Vensys 121 turbine models agreed with the Planning Authority, under condition 4(a) of planning permission ABP-307726-20. Turbine T1 will have a hub height of 95.53m, a blade diameter of 138m and a blade tip height of 164.65m. Turbine T2 will have a hub height of 81m, a blade diameter of 138m and a blade tip height 150m. The combined output from the turbines will be 4.9MW; 2. Relocation of the access road serving the development; 3. The relocation of underground electrical cabling to the relocated access road and additional underground electrical cabling; 4. Increase in the hub height of turbine T1 95.53m, increasing the blade tip height from 150m to 164.65m and micro-siting of turbine T1 by 12.75m; 5. Increased area of the hardstands associated with each turbine; 6. Amended substation structure; 7. Inclusion of a battery storage unit and a transformer unit at |
| 22193 |
INCOMPLETED APPLICATION |
PERMISSION |
|
20/04/2022
Wednesday |
Peter Gillooly, |
Derrane &
Roxborough
Co. Roscommon |
Permission for development consisting of amendments to extant planning permission ABP-307726-20 and will provide for: 1. Erection of two Enercon E138 turbine models in lieu of the Vensys 121 turbine models agreed with the Planning Authority, under condition 4 (a) of planning permission ABP-307726-20; Turbine T1 will have a hub height of 95.53m, a blade diameter of 138m and a blade tip height of 164.65m; Turbine T2 will have a hub height of 81m and a blade diameter of 138m and a blade tip height of 150m. The combined output from the turbines will be 4.9MW; 2. Relocation of the access road serving the development; 3. The relocation of under-ground electrical cabling to the relocated access road and additional underground electrical cabling; 4. Increase in the hub height of turbine T1 to 95.53m, increasing the blade tip height from 150m to 164.65 m and micro-siting of turbine T1 by 12.75m. 5. Increased area of the hardstands associated with each turbine; 6. Amended substation structure to incorporate a proposed modular windfarm control room and switch room and an ESB modular MV station; 7. Inclusion of a battery storage unit and a transformer unit; 8. Revised site boundaries at |
| 22323 |
INCOMPLETED APPLICATION |
PERMISSION |
|
28/06/2022
Tuesday |
Peter Gillooly, |
Derrane & Roxborough
Co. Roscommon
|
Permission for (A) amendments to (i) extant planning permission PD/18/313, which amended planning application PD/11/126, (ii) extant planning permission ABP-303677-19, which amended planning permissions PD/11/126 and PD/18/313 and (iii) extant planning permission ABP-307726-20, which amended planning permission PD/18/313. (B) Permission for the development of a battery storage unit and a transformer unit. The amendments in (A) above will provide for : 1. Erection of two Enercon E138 turbine models in lieu of the Vensys 121 turbine models agreed with the Planning Authority, under condition 4(a) of planning permission ABP-3037726-19. Turbine T1 will have a hub height of 95.53m, a blade diameter of 138m and a blade tip height of 164.65m. Turbine T2 will have a hub height of 81m and blade diameter of 138m and a blade tip height of 150m. The combined output from the turbines will be 4.9MW. 2. Relocation of the access road serving the development, as previously permitted under planning permissions PD/11/126, PD/18/313, ABP-303677-49 and ABP-307726-20, 3. The relocation of underground electrical cabling to the relocated access road referred to under paragraph 2 above and additional underground electrical cabling to serve the proposed modular windfarm control and switch rooms, the ESB modular MV station referred to in paragraph 6 below and the new battery storage and transformer units referred to in (B) above, 4. Increase in the hub height of turbine T1 to 95.53m, increasing the blade tip height from 150m to 164.65m and mocro-siting of turbine T1 by 12.75m. 5. Increase in the area of the hardstands associated with each turbine, 6. Amended substation structure to incorporate a proposed modular windfarm control from and switch rooms and ESB modular MV station, 7. Revised site boundaries at |
| 22363 |
APPLICATION FINALISED |
PERMISSION |
R |
12/07/2022
Tuesday |
Peter Gillooly, |
Derrane & Roxborough
Co Roscommon
|
Permission for: (A) amendments to (i) extant planning permission PD/18/313, which amended planning application PD/11/126, (ii) extant planning permission ABP-303677-19, which amended planning permissions PD/11/126 and PD/18/313 and (iii) extant planning permission ABP-307726-20, which amended planning permission PD/18/313; (B) Permission for the development of a battery storage unit and a transformer unit. The amendments in (A) above will provide for : 1. Erection of two Enercon E138 turbine models in lieu of the Vensys 121 turbine models agreed with the Planning Authority, under condition 4(a) of planning permission ABP-3037726-19. Turbine T1 will have a hub height of 95.53m, a blade diameter of 138m and a blade tip height of 164.65m. Turbine T2 will have a hub height of 81m and blade diameter of 138m and a blade tip height of 150m. The combined output from the turbines will be 4.9MW; 2. Relocation of the access road serving the development, as previously permitted under planning permissions PD/11/126, PD/18/313, ABP-303677-19 and ABP-307726-20; 3. The relocation of underground electrical cabling to the relocated access road referred to under paragraph 2 above and additional underground electrical cabling to serve the proposed modular windfarm control and switch rooms, the ESB modular MV station, referred to in paragraph 6 below and the new battery storage and transformer units referred to in (B) above; 4. Increase in the hub height of turbine T1 to 95.53m, increasing the blade tip height from 150m to 164.65m and micro-siting of turbine T1 by 12.75m; 5. Increase in the area of the hardstands associated with each turbine; 6. Amended substation structure to incorporate a proposed modular windfarm control and switch rooms and an ESB modular MV station; 7. Revised site boundaries at |
