Planning Application: 1475 (Kildare County Council )
File Number:
1475
Application Type:
PERMISSION
Planning Status:
APPLICATION FINALISED
Received Date:
07/02/2014
Decision Due Date:
03/04/2014
Validated Date:
07/02/2014
Invalidated Date:
Further Info Requested:
Further Info Received:
Withdrawn Date:
Extend Date:
Decision Type:
Conditional
Decision Date:
03/04/2014
Leave to Appeal:
Appeal Date:
Commenced Date:
Submissions By:
13/03/2014
Applicant Details
Applicant name:
Intel Ireland Limited
Applicant Address:
Phone Number:
Fax Number:
Corresp.
Address:
Applicant Details
Proposed Development
Development Description:
construction of a structure to provide weather protection within the previously permitted Ryebrook Extension (Intel dedicated) high tension Sub-station Compound (Kildare County Council Planning Reg. Ref. 11/1207 and 12/993), including roof, support steelwork and side cladding, 9.3 metres high over an area of 740 square metres. This application consists of a variation to a previously permitted development on an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended for the Protection of the Environment Act, 2003, now Industrial Emissions Licence) is required and full details of the proposed development and its anticipated environmental impacts will be notified to the Environmental Protection Agency. The development consists of modifications to an establishment within the meaning of the European Communities (Control of Major Accident Hazards involving Dangerous Substances) Regulations 2006,
Development Address:
Collinstown Industrial Park , (Collinstown, Leixlip, Blakestown and Kellystown Townlands), Leixlip, Co. Kildare.
Architect Name:
Gerry Loughrey - Jacobs Engineering
Location Key:
COLLINSTOWN LEIXLIP
Electoral Division:
Planner:
Elaine Donohoe
Social Housing Exempt:
Plan Enforcement #:
IPC
Licence Required:
No
Waste Licence Required:
No
Protected Structure:
No
Protected Structure #:
Development Name:
Proposed Development
Comments
Significant Case Flag:
Comments:
Decision
Decision Date:
03/04/2014
Manager Order:
38190
Decision Type:
Conditional
Number of Conditions:
3
Grant Date:
05/05/2014
Grant Managers Order #:
38190
Section 47
Apply?:
Part 5
Apply?:
Expiry Date:
04/05/2019
Decision Description:
construction of a structure to provide weather protection within the previously permitted Ryebrook Extension (Intel dedicated) high tension Sub-station Compound (Kildare County Council Planning Reg. Ref. 11/1207 and 12/993), including roof, support steelwork and side cladding, 9.3 metres high over an area of 740 square metres. This application consists of a variation to a previously permitted development on an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended for the Protection of the Environment Act, 2003, now Industrial Emissions Licence) is required and full details of the proposed development and its anticipated environmental impacts will be notified to the Environmental Protection Agency. The development consists of modifications to an establishment within the meaning of the European Communities (Control of Major Accident Hazards involving Dangerous Substances) Regulations 2006,
Collinstown, Leixlip Blakestown, Kellystown Collinstown Industrial Park
(1) Modular Storage Unit. A Single storey storage unit, sized approximately 7 metres by 12 metres and 6 metre high, located in the Utilities Yard to the north of the existing Fab10 Support Building. (2) FAB10 Waste Tanks. The installation of 3no. new bunded waste storage tanks, 2no. sized approximately 2.5 metres in diameter and 16.5 metres high, located in the Utilities Yard to north of the existing Fab10 Support Building and 1no. sized approximately 3.7metres in diameter and 15 metres high located to the north of the Fab10 Utilities Yard. (3) Process Support Building Extension. The construction of a two-storey extension to the existing Process Support Building (PSB) sized approximately 20 metres by 11 metres and 14 metres high, located to the north east of the existing Fab 24 Process Support Building. (4) FAB24 and FAB14 Waste Tanks. The installation of 3no. additional waste tanks and associated access platforms and stairways, 1no. sized approximately 9 metres by 10 metres and 7 metres high, located in the Utilities Yard to the north of the existing FAB24 Manufacturing Building and 1no. sized approximately 3 metres high located to the south of existing FAB14 Process Building and 1 no. sized approximately 4.25 metres in diameter and 16 metres high, located to the south of existing FAB14 process Building.(5) Site Works. The proposed development includes linking pipe-bridges to the Fab10 and Fab14 support buildings, site development works, site utilities, site lighting, separation walls, road alterations, landscaping and all associated site works. This application consists of a variation to a previously permitted development for an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended by the Protection of the Environment Act, 2003) is required. A Natura Impact Statement ("NIS") accompanies this application for inspection or purchase at the office of the Planning Authority. This is a site to which the Chemical Act (Control of Major Accident Hazards Involving Dangerous Substances) Regulations 2015 (S.I.209 of 2015) applies
Collinstown, Leixlip Blakestown, Kellystown Collinstown Industrial Park
additions, alterations and modification to existing/permitted industrial facilities. The proposed development comprises of the following: 1. An extension to plant and equipment associated with FAB 34 located on an existing/permitted concrete slab to the rear of FAB 34. The development also comprises a modification to the proposed Boiler and Chiller Building to facilitate this development reducing its enclosed area from 22,188 square metres to 19,208 square metres. 2. The proposed equipment comprises 9 no. holding and treatment tanks located in a sealed reinforced concrete bund sized 542 square metres approximately together with associated pumps, pipe bridges and equipment. The tanks vary in height from 5 metres to 9 metres approximately. 3. The permitted (ABP Ref. Pl. 09.304672-19 / KCC Reg. Ref. 1991) two storey Boiler and Chiller Building is reduced by 2,980 square metres approximately, including modifications to the existing elevations, relocated escape stairs and miscellaneous layout modifications. The height of the modified facility will match the existing building height at 24.5 metres. 4. The works also include modifications to site works, underground utilities, roof mounted equipment and site lighting and a louvred screen wall approximately 85 metres in length, as an extension to the existing 8.5-metre-high elevational screen located on top of the Boundary wall to the rear of the Boiler and Chiller Building. 5. Erection of 2 no. ground level, illuminated monument signs at the main east and west vehicular entrances to the site from the R148. Both signs are 1.5 metres high and 2.4 metres wide approximately. 6. Illumination (internally) of 1 no. replacement building sign to the south elevation of the IR6 Building. The sign is 1.4 metres high and 3.3 metres wide approximately and is mounted so that the top of the sign is approximately 0.5 metres below for the parapet level of IR6. This application consists of a variation to a previously permitted development for an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 )as amended by the Protection of the Environment Act, 2003) is required. This is a site to which the Chemicals Act (Control of Major Accident Hazards Involving Dangerous Substances) Regulations 2015 (S.I. 209 of 2015) applies
No Environment Impact Assesments Associated with this Application