1. Demolition of extg.2-storey canteen & changing facility on S/E side of site. Demolition & removal of existing 3-storey office block located on southern bld.elevation along Dublin Rd. Construction of new 3-storey Welfare Facility Block in the location of original office block. Grnd.floor consist of staff toilets & changing rooms (135sq.m.).Overall 1st flr shall measure 135sq.m. & consist of the relocated canteen (67sq.m), store room(14sq.m),kitchen(19sq.m) & assoc.staff toilets. 2nd flr shall measure 140sq.m) overall consisting of staff offices. Bld.shall be 11.38sq.m.high at its highest point & shall be clad in Kingspan KS1000 micro rib flat panel coloured mushroom to match extg. 2. Construction of extension to existing chill store & filling hall blds. Ext.shall house the plastic bottle debagging machines & is to be served by 3 loading docks on the eastern elevation of ext. Proposed debagging & uploading bld.extension shall measure 236sq.m. & be 7.1m high at its highest point. The walls shall be clad in Kingspan KS1000 panel's coloured mushroom to match extg. 3.Enclosure of existing raw & finished product milk silos on the N/W elevation of extg.bld. This enclosure shall measure 300sq.m. with a max.height of 10.3m. The nett additional bld.area enclosed shall be 180sq.m. The bld.shall be clad in Kingspan KS1000 panel's coloured mushroom to match extg. 4.Alterations to extg.entrance & construction of new car park with a capacity for 51 vehicles & an overall area of 1290sq.m.utilising permeable paving. The overall dev. incl. building extension & modifications shall measure 946sq.m. with a net additional building footprint of approx.480sq.m.
Permission at their existing milk processing plant. The proposed works shall consist of additions to existing planning permission 11/37 as follows: 1) the partial demolition of the existing two storey canteen & changing room structure & its integration into the debagging building as approved under planning ref 11/37. This shall involve the removal of the existing prefabricated canteen & its replacement with a rendered blockwork structure similar to the existing ground floor canteen. Plan dimensions & overall heights shall not exceed the footprint of the existing building. 2) The construction of a single storey store building at the southwestern boundary. This building shall be clad in Kingspan KS1000 panels coloured to match existing
Permission at their existing milk processing plant. The proposed works shall consist of additions to existing planning permission 11/37 as follows: 1) The alteration & refurbishment of the existing two storey canteen structure. This will involve integrating the existing canteen & changing areas within the proposed debagging extension outlined in the application 11/37. The partial demolition of the existing structure & removal of the first floor prefabricated building. The proposed overall area of the building footprint will not increase for the existing 165m². 2) The proposed first floor shall be constructed with blockwork cavity walls coloured to match existing. The building height & dimensions shall not exceed the existing. 3) The construction of a single storey maintenance store building at the southeastern boundary
Retention and Permission for: 1) Retention of workshop extension with an approximate floor area of 62m². Workshop was previously approved under Reg. Ref. No. 12/71 as a stand alone building. 2) Permission for a proposed extension to the existing Buffer Packaging Store with an approximate floor area of 63m². The extension will include an Acoustic Barrier at roof level along the front and side elevation. 3) Permission for the demolition of existing office extension with a floor area of 12m² and construction of a proposed extension with an approximate floor area of 15m². Alterations to existing office elevations
Permission for development to consist of a single storey extension to the front elevation of the existing milk filling hall building. The proposed extension will have an approximate floor area of 28m2.
Permission for 1) new vehicular site entrance to the south facing elevation to the west of the existing single storey office building off the Dublin Road 2) Existing carpark layout revised 3) New boundary wall & fence along the site on the Dublin Road & closure of existing vehicular entrance 4) Proposed security building with sampling laboratory & gantry 57m². 5) new mixing room, ingredients & packaging storeage extension (247m²) to existing office building to south facing elevation.
Retention and Permission. Retention of alterations to shop including increased storage areas, change of use of part ground floor area from storage to retail and roof lights together with permission for the provision of new external fire escape stairs, new fire escape at ground floor level, alterations to parking area and all associated site development works.
No Environment Impact Assesments Associated with this Application
