Planning Application: 20311 (Louth County Council )
File Number:
20311
Application Type:
PERMISSION
Planning Status:
APPLICATION FINALISED
Received Date:
30/04/2020
Decision Due Date:
18/07/2020
Validated Date:
30/04/2020
Invalidated Date:
Further Info Requested:
Further Info Received:
Withdrawn Date:
Extend Date:
Decision Type:
Conditional
Decision Date:
02/07/2020
Leave to Appeal:
Appeal Date:
Commenced Date:
Submissions By:
27/06/2020
Applicant Details
Applicant name:
Glanbia Ireland DAC
Applicant Address:
Phone Number:
Fax Number:
Corresp.
Address:
Applicant Details
Proposed Development
Development Description:
Permission for construction of a new roof structure over an open loading bay to the northern side of the site. Construction of a new canopy over the existing milk intake to the northern side of the building and all associated site work. Minor demolition works consisting of the removal of a canopy and side cladding to the northern façade
Development Address:
Dublin Road, Drogheda, Co Louth
Architect Name:
Location Key:
DUBLIN ROAD DROGHEDA.
Electoral Division:
Planner:
David Hall
Social Housing Exempt:
Plan Enforcement #:
IPC
Licence Required:
No
Waste Licence Required:
No
Protected Structure:
No
Protected Structure #:
Development Name:
Proposed Development
Comments
Significant Case Flag:
Comments:
Decision
Decision Date:
02/07/2020
Manager Order:
376/2020
Decision Type:
Conditional
Number of Conditions:
4
Grant Date:
03/08/2020
Grant Managers Order #:
376/2020
Section 47
Apply?:
Part 5
Apply?:
Expiry Date:
02/08/2025
Decision Description:
Permission for construction of a new roof structure over an open loading bay to the northern side of the site. Construction of a new canopy over the existing milk intake to the northern side of the building and all associated site work. Minor demolition works consisting of the removal of a canopy and side cladding to the northern façade
1. Demolition of extg.2-storey canteen & changing facility on S/E side of site. Demolition & removal of existing 3-storey office block located on southern bld.elevation along Dublin Rd. Construction of new 3-storey Welfare Facility Block in the location of original office block. Grnd.floor consist of staff toilets & changing rooms (135sq.m.).Overall 1st flr shall measure 135sq.m. & consist of the relocated canteen (67sq.m), store room(14sq.m),kitchen(19sq.m) & assoc.staff toilets. 2nd flr shall measure 140sq.m) overall consisting of staff offices. Bld.shall be 11.38sq.m.high at its highest point & shall be clad in Kingspan KS1000 micro rib flat panel coloured mushroom to match extg. 2. Construction of extension to existing chill store & filling hall blds. Ext.shall house the plastic bottle debagging machines & is to be served by 3 loading docks on the eastern elevation of ext. Proposed debagging & uploading bld.extension shall measure 236sq.m. & be 7.1m high at its highest point. The walls shall be clad in Kingspan KS1000 panel's coloured mushroom to match extg. 3.Enclosure of existing raw & finished product milk silos on the N/W elevation of extg.bld. This enclosure shall measure 300sq.m. with a max.height of 10.3m. The nett additional bld.area enclosed shall be 180sq.m. The bld.shall be clad in Kingspan KS1000 panel's coloured mushroom to match extg. 4.Alterations to extg.entrance & construction of new car park with a capacity for 51 vehicles & an overall area of 1290sq.m.utilising permeable paving. The overall dev. incl. building extension & modifications shall measure 946sq.m. with a net additional building footprint of approx.480sq.m.
Permission at their existing milk processing plant. The proposed works shall consist of additions to existing planning permission 11/37 as follows: 1) The alteration & refurbishment of the existing two storey canteen structure. This will involve integrating the existing canteen & changing areas within the proposed debagging extension outlined in the application 11/37. The partial demolition of the existing structure & removal of the first floor prefabricated building. The proposed overall area of the building footprint will not increase for the existing 165m². 2) The proposed first floor shall be constructed with blockwork cavity walls coloured to match existing. The building height & dimensions shall not exceed the existing. 3) The construction of a single storey maintenance store building at the southeastern boundary
Retention and Permission for: 1) Retention of workshop extension with an approximate floor area of 62m². Workshop was previously approved under Reg. Ref. No. 12/71 as a stand alone building. 2) Permission for a proposed extension to the existing Buffer Packaging Store with an approximate floor area of 63m². The extension will include an Acoustic Barrier at roof level along the front and side elevation. 3) Permission for the demolition of existing office extension with a floor area of 12m² and construction of a proposed extension with an approximate floor area of 15m². Alterations to existing office elevations
