Planning Application: 17240 (Kildare County Council )
File Number:
17240
Application Type:
PERMISSION
Planning Status:
APPLICATION FINALISED
Received Date:
07/03/2017
Decision Due Date:
01/05/2017
Validated Date:
07/03/2017
Invalidated Date:
Further Info Requested:
Further Info Received:
Withdrawn Date:
Extend Date:
Decision Type:
Conditional
Decision Date:
28/04/2017
Leave to Appeal:
Appeal Date:
Commenced Date:
Submissions By:
10/04/2017
Applicant Details
Applicant name:
Tegral Holdings Limited,
Applicant Address:
Phone Number:
Fax Number:
25178327
Corresp.
Address:
Applicant Details
Proposed Development
Development Description:
the upgrade of part of the existing production building to include the following: (i) Removal of part of the first floor of the existing building (243sqm); (ii) Removal of part of the existing roof structure, cladding and associated structure (1448sqm); (iii) Erection of new structure within the production building (1448sqm) to cover the existing floor area and to allow for an increase in height within the facility to a maximum eaves height of 8.5m and a maximum ridge height of 10.5m and all associated site development works
Development Address:
Bleach Townland,, Upper William Street,, Athy,, Co. Kildare.
Architect Name:
Martin Peters
Location Key:
WILLIAM STREET UPPER ATHY
Electoral Division:
Planner:
Fiona Breen
Social Housing Exempt:
Plan Enforcement #:
IPC
Licence Required:
No
Waste Licence Required:
No
Protected Structure:
No
Protected Structure #:
Development Name:
Proposed Development
Comments
Significant Case Flag:
Comments:
Decision
Decision Date:
28/04/2017
Manager Order:
DO11946
Decision Type:
Conditional
Number of Conditions:
9
Grant Date:
16/06/2017
Grant Managers Order #:
DO11946
Section 47
Apply?:
No
Part 5
Apply?:
No
Expiry Date:
15/06/2022
Decision Description:
the upgrade of part of the existing production building to include the following: (i) Removal of part of the first floor of the existing building (243sqm); (ii) Removal of part of the existing roof structure, cladding and associated structure (1448sqm); (iii) Erection of new structure within the production building (1448sqm) to cover the existing floor area and to allow for an increase in height within the facility to a maximum eaves height of 8.5m and a maximum ridge height of 10.5m and all associated site development works
(1) Permission for the indefinite Retention of alterations made to planning reference 17/240. The alterations included the additional upgrade of part of the existing production building including the following: (i) Removal of part of the existing roof structure and cladding and part of the existing northern elevation cladding and associated structure (760sqm); (ii) Erection of new structure within the production building (760sqm). (2) To cover the existing floor area and to allow for an increase in height within the facility to a maximum eaves height of 8.5m and a maximum ridge height of 10.5m; (iii) Part new northern elevation including structure and cladding and (2) Permission for the upgrade of part of the existing production building to include the following: (i) Removal of part of the existing roof and wall cladding and associated structure (139sqm); (ii) Erection of new structure within the production building (139sqm) to cover the existing floor area and to allow for an increase in height within the facility to a maximum eaves height of 15.55m and a maximum ridge height of 17.29m and all associated site development works
for the existing production building to include the following (i) removal of the existing covered canopy roof structure and cladding (328m2)and (ii) erection of a new structure (328m2) to allow for increased height to a maximum eves height of 6m and a maximum ridge height of 8m with associated site development works
No Environment Impact Assesments Associated with this Application
